IHSE USA 480 Series Draco tera enterprise - Manual (Page 162)

Draco tera
162
2013-08-14
Switching operations from the own CON device can only be done to
CPU devices that are available in the list CPU Devices.
Listed CPU devices highlighted in red color are currently connected in
Private Mode and are blocked by the connected CON device.
Switching via Selection List for CPU Devices
The matrix offers the possibility to execute KVM switching operations by a
selection list for CPU devices next to the OSD in full screen.
In order to use the selection list for CPU Devices, proceed as follows:
1. Activate the option Enable CPU Selection in the menu
Configuration for those consoles where the selection list for CPU
devices should be available.
2. Execute the key sequence for opening the OSD. The selection list
immediately appears in the preset position of the extender OSD.
By pressing the key , inactive CPU Devices can be hidden to ensure
a better overview.
3. Execute the desired switching operation by pressing the respective
key (see Chapter 6.3, Page 164).
In order to not execute a switching operation and access OSD, press
the key .
In order to close the selection list, press the key .