IHSE USA 480 Series Draco tera enterprise - Manual (Page 150)

Draco tera
150
2013-08-14
5.11.2 Extender Update
The firmware of the extenders connected to the matrix can be updated in
this menu.
You have the following possibilities to access the menu:
Preparation
Take the following steps in order to be prepared for the extender update:
1. Save the matrix configuration externally (see Chapter 5.9.4, Page
144).
Open Extras > Options in the menu bar and insert in the setting
Firmware Directory the directory from which the update files should
be standardly sourced.
2. Connect all hot spare extenders to the matrix.
For reasons of network stability, an update via WLAN is not
recommended.