IHSE USA 480 Series Draco tera enterprise - Manual (Page 105)

Configuration
2013-08-14
105
OSD
 Select via Configuration > User Macros in the main menu the user
for which a user macro has to be created.
Menu Configuration – User Macros
In order to create a macro for the selected user, proceed as follows:
1. Select in the field Key that one (1-16) for which a macro has to be
created.
2. Select the respective place on the list (1-16) of the key that has to be
set with a macro key.
3. Select for the marked place on the list a macro command in the field
Macro Data.
4. Set the necessary parameters P1 and P2 (e.g. CON Devices or CPU
Devices) for the selected macro command.
5. Confirm your inputs by pressing the key and repeat the
process for further macro commands, if necessary.