IHSE USA 480 Series Draco tera enterprise - Manual (Page 76)

Draco tera
76
2013-08-14
Field Selection Description
activated Save the current configuration of the matrix
in the flash memory periodically.
Note: During saving of the configuration,
the matrix will not be operational. Saving
takes place every 600 seconds, as long as
changes of the configuration or switching
operations have been executed in the
meantime. Auto Save
deactivated Function not active (default)
activated
Send all performed switching commands in
the matrix as an echo via serial interface.
Note: This function should be enabled
when using a media control via serial
interface. Enable
COM Echo
deactivated Function not active (default)
activated
Send all performed switching commands in
the matrix as an echo via LAN connection.
Note: This function should be enabled
when using a media control via LAN
connection or when using stacking with two
ore more matrices. Enable LAN
Echo
deactivated Function not active (default)
activated
Synchronize the slave matrix according to
the switch status of the master matrix. Slave Matrix
deactivated Function not active (default)
Master IP
Address Numerical
value Set the network address of the master
matrix (default value: 000.000.000.000)
activated Keep I/O boards with wrong or invalid
firmware online in the matrix. Ivalid IO-
Boards
deactivated Shut down I/O boards with wrong or invalid
firmware automatically (default).
Hor. Mouse
Speed 1/x 1-9 Adjustment of the horizontal mouse speed,
1 = slow, 9 = fast (default value: 4)
Ver. Mouse
Speed 1/x 1-9 Adjustment of the vertical mouse speed,
1 = slow, 9 = fast (default value: 5)
Double Click
Time 100-800 Adjustment of the time slot for a double
click (default value: 200 ms)
Keyboard
layout Region Set the OSD keyboard layout according to
the used keyboard (default: German (DE))