IHSE USA 480 Series Draco tera enterprise - Manual (Page 168)

Draco tera
168
2013-08-14
Possibility 2:
 Select Status > Matrix View in the task area.
Menu Status – Matrix View
In order to perform switching operations between CON and CPU devices
proceed as follows:
1. Move the mouse cursor to the port that has to be switched.
2. Hold down the left mouse button and move the cursor to the port that
has to be connected to the initial port. The current cursor movement
will be displayed by a black auxiliary line.
3. Release the left mouse button. A popup to select the available
switching type (Full Access, Video Access or Private Mode) will be
opened.
4. Select the desired switching type. The switching operation will be
immediately executed. At the same time all extender units that are
assigned to the involved devices will be switched.
If there is a red cross on a port when switching by using the Matrix View,
the console to be connected does not have access rights to the respecting
CPU at this port.