IHSE USA 480 Series Draco tera enterprise - Manual (Page 43)

Description
2013-08-14
43
Java Tool
In order to activate the SNMP agent, proceed as follows:
1. Select System > Network in the task area.
Menu System – Network
2. Activate the option SNMP Agent in the tab SNMP. By activating this
option, the permission for an active query of the SNMP agent is
granted.
In order to configure a SNMP-Server, proceed as follows:
1. Select Configuration > Network in the task area.
2. Activate the option Enable Traps within SNMP Server. This function
allows an active transmission of trap messages from the SNMP agent
to the SNMP server.
3. Set the IP address of the SNMP within SNMP Server.
4. Activate the requested traps.
For an activation of the SNMP agent function or the SNMP server
function, a restart of the matrix is required.
Pos: 32 /806-IHSE/Beschreibung/System Check/480_xx @ 9\mod_1375105102198_6.doc @ 78732 @ 2 @ 1