IHSE USA 480 Series Draco tera enterprise - Manual (Page 151)

Configuration
2013-08-14
151
Performing the Update in Standard Mode (parallel Update)
1. Select Administration > Update EXT Firmware in the task area. The
standard mode for the parallel update will be selected by default and
the tab Upload Firmware will be opened.
Menu Administration – Update EXT Firmware
2. Before the actual update process, all firmware files have to be
uploaded to the respective I/O boards on that extenders will have to
be updated. By selecting the update files, the I/O boards will be
automatically chosen for the upload in the column Selected and
highlighted in green, but only if a newer firmware version is selected.
3. Start the upload and distribution of the update files by pressing the
button Upload.
By performing the upload process, no update files will be installed. the
update process can be performed at a later time.
If there are not selected all I/O cards, the upload of the update files will be
performed in sequence.