IHSE USA 480 Series Draco tera enterprise - Manual (Page 107)

Configuration
2013-08-14
107
 Via right click on the macro list, macros of the selected key can be
copied into the cache by using the function Copy Key Macros. You
can paste the macros from the cache into a key by using the function
Paste Key Macros and you can reset all macros of the selected key
by using the function Reset Key Macros.
Pos: 66 /806-IHSE/Konfiguration/480_Extender-Einstellungen/480-xx @ 7\mod_1309938366618_6.doc @ 53197 @ 23333 @ 1
5.6 Extender Settings
All extender units are managed in this menu. This also contains the
creation of new extender units and the deletion of existing extender units.
The extender unit describes the connection of an physical extender to the
matrix. Every extender board with a direct cable connection to the matrix
is recognized as an extender unit. Dual-Head KVM extenders will be
recognized as two independent extender units.
KVM Extenders automatically create extender units inside the matrix.
You have the following possibilities to access the menu:
You can select between the following settings:
Field Selection Description
ID Text Numerical value of the extender ID
(KVM extenders: ID is provided by
extender unit (Serial No.) and cannot be
changed)
Name Text Name of the extender unit
activated Create an extender unit with a fixed port
assignment (default) Fixed
deactivated Function not active.
Port 1–288
(depending
on the
matrix) Port number of the extender unit