IHSE USA 480 Series Draco tera enterprise - Manual (Page 69)

Configuration
2013-08-14
69
5.2.3 Control via Serial Interface
The Draco tera operating system offers various functions for an operation
via serial interface. There are telegrams for Switching single or all
connections available, both unidirectional and bidirectional. In addition to
that, there are telegrams for an overall definition of the total switching
status and for saving and loading such switching states.
By request, the Draco tera optionally provides an echo of all effected
switching operations via serial interface or network interface. That is why
you have the possibility to track the current configurations of the matrix at
any time and so update your own applications.
As an additional application you can switch parallely Draco tera clones as
slaves (Stacking) via serial network interface.
Pos: 48 /806-IHSE/Konfiguration/480_Zuordnung/480-xx/Zuordnung @ 7\mod_1309937797383_6.doc @ 52976 @ 2 @ 1
5.3 Assignment
The Draco tera offers the possibility of a console specific or a CPU
specific assignment.
 The first possibility is to assign virtual CPUs to real CPUs.
 The second possibility is to assign real consoles to virtual consoles.
Pos: 49 /806-IHSE/Konfiguration/480_Zuordnung/480-xx/Virtuelle CPU @ 7\mod_1309937891305_6.doc @ 53012 @ 3 @ 1
5.3.1 Virtual CPU
You can assign virtual to real CPUs in this menu.
With this function the effort for switching several consoles to the same
CPU can be reduced. If there a several consoles connected to a virtual
CPU that is assigned to a real CPU, you will only have to change the real
CPU once and all consoles will receive the video signal of the new CPU.
You have the following possibilities to access the menu: