Fluke Biomedical ProSim 6 - Manual (Page 86)

ProSim 6/8
Users Manual
74
Note
When the battery pack is installed in the Product, ensure the battery
charger is enabled. See the How to Set Battery Settings section earlier in
the manual to enable and disable the battery charger.
The battery charge LED on the battery pack shows red or green when the battery charges.
When the LED is green, the battery is charged.
When you have two or more battery packs, you can charge one battery externally while
you use the other to energize the Product.
Battery Charge
Indicator
Battery LED
glh047.eps
Figure 62. External Battery Charging Connections
When the battery pack is removed from the Product, push the button below the charge
level indicators to see the battery charge level. See Figure 62.
Battery Removal
The battery pack is easy to remove and replace. To remove the battery pack:
1. Push down on the battery pack latch as shown in Figure 63.
2. Remove the battery pack from the Product.