Fluke Biomedical ProSim 6 - Manual (Page 80)

ProSim 6/8
Users Manual
68
How to Print Test Results
With a PCL5 compatible printer connected to the USB A Controller Port, you can print a
test results record.
Note
A compatible printer must be connected to the Product before the Print
softkey appears in the view screen of a test results record.
1. Do the steps in the How to View Test Results section to show a test results record in
the display.
2. Push the Print softkey.
The data in the test results record shown in the display is transmitted through the printer
port.
How to Delete Saved Data
Removal of data from memory is done through the View Memory feature. You can only
delete test ID records. When the test ID record is deleted, all saved test results data
connected to that test ID is deleted from memory. To remove a test ID record:
1. Push .
2. Push , , , and  to highlight View Memory.
3. Push .
4. Push  or  to highlight an operator.
5. Push .
Note
If there is only one operator, the operator list does not show in the display
and the Product skips steps 4 and 5.
6. Push  or  to highlight a test ID record.
7. Push the Delete softkey to delete the test ID record.
A Confirm Delete screen shows in the display with a “Delete Record?” message.
When you push the Yes softkey, the test ID record is deleted from memory and the
display goes back to the View Memory screen. Push the No softkey to abort the
delete.
The Delete All softkey will delete all the test ID records associated with the operator. A
Confirm Delete screen shows in the screen with a “Delete ALL records for this
operator?” message.