Fluke Biomedical ProSim 6 - Manual (Page 18)

ProSim 6/8
Users Manual
6
Table 5. Top-Panel Controls and Connections (cont.)
Item Name Description
14 SpO2 Connector Connector to the SpO2 accessory.
15 IBP Channel 2 Connector Connector to an IBP input of the patient monitor.
16 Cardiac Output Connector Connector to the Cardiac input of the patient monitor.
17 IBP Channel 1 Connector Connector to the IBP input of the patient monitor.
18 Temperature Connector Connector to the Temperature input of the patient monitor.
Front Right
Back
1
4
7 8
5 6 2 3
glh035.eps
Figure 2. Back, Front, and Side-Panel Connections
Table 6. Back, Front, and Side-Panel Connections
Item Name Description
1 AC/DC Supply Connector Input jack for the DC output of the AC/DC supply connector.
2 Battery Charge LED Battery charges when LED shows red. Green shows battery
charge is complete.
3 Battery Latch Locks the battery pack into the Product. Push down to remove
the battery pack.
4 Mini B USB Device Port Used to connect to a PC for remote control or download test
results data to a PC.
5 USB A Controller Port For external keyboard, barcode reader, or printer.
6 ECG BNC Connector High-level output of ECG signal.
7 Air Port Connector Pressure port for NIBP cuff and monitor.
8 Magnetic Holder for SpO2 Finger
Module Holds the SpO2 Optical Emitter and Detector finger module in
two orientations.