Comtech EF Data CDM-570 - Manual (Page 416)

CDM-570/570L Satellite Modem with Optional IP Module Revision 12
Appendix E MN/CDM570L.IOM
E–30
E.5.8.3 Ethernet Statistics Commands and Queries
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction Code
and Qualifier)
Response to
Query
Ethernet Rx
Statistics N/A 10 bytes,
Numericals Query only.
Display all the Ethernet Receive statistics in text. ERT!
ERT?
Text display of all
Ethernet Receive
statistics.
\r =CR = 0x0D
\n = Newline =
0x0A
Ethernet Tx Bytes
Ethernet Tx Good Frames
Ethernet Tx Max Collision Count
Ethernet Tx Late Collision Count
Ethernet Tx DMA Underrun Errors
Ethernet Tx Lost Carrier Sense Count
Ethernet Tx Deferred Count
Ethernet Tx Single Collision Count
Ethernet Tx Multicast Collision Count
Ethernet Tx Total Collision Count
[ 0994]chr(13)
[ 112]chr(13)
[ 0]chr(13)
[ 0]chr(13)
[ 0]chr(13)
[ 0]chr(13)
[ 0]chr(13)
[ 0]chr(13)
[ 0]chr(13)
[ 0]chr(13)chr(10)
Ethernet Rx
Statistics N/A 10 bytes,
Numericals Query only.
Display all the Ethernet Transmit statistics in text. ETT!
ETT?
Text display of all
Ethernet Transmit
statistics.
\r =CR = 0x0D
\n = Newline =
0x0A
Ethernet Rx Bytes
Ethernet Rx Good Frames
Ethernet Rx CRC Error Frames
Ethernet Rx Alignment Errors
Ethernet Rx Resource Errors
Ethernet Rx Collision Detect Errors
Ethernet Rx Runt Frames
Ethernet Rx Flow Control Pause Frames [ 6786]chr(13)
[ 91]chr(13)
[ 0]chr(13)
[ 0]chr(13)
[ 0]chr(13)
[ 0]chr(13)
[ 0]chr(13)
[ 0]chr(13)chr(10)
Clear Ethernet
Stats ESC=1 1byte number.
1 – Clear stats
Set only.
Setting this value to ‘1’ clears all the Ethernet Receive & Transmit statistics. ESC=
ESC! ESC? ESC!