Comtech EF Data CDM-570 - Manual (Page 137)

CDM-570/570L Satellite Modem with Optional IP Module Revision 12
Front Panel Operation MN/CDM570L.IOM
5–51
If the FAST Access Code is not entered correctly, or an invalid code is entered, the modem
rejects the code and displays the message “Fast Code Rejected!” as follows:
FAST Code Rejected!
(ENTER or CLEAR)
Re-enter the FAST Access Code. Should the code entry error persist after repeating the
procedure, contact Comtech EF Data Customer Support for further assistance.
(UTIL: FAST) FAST Configuration: Demo Mode
FAST Demo Mode: Off On
604800 seconds remain
Use the
◄ ► arrow keys to select FAST Demo Mode as Off or On, and then press ENTER.
When On, the bottom line displays the number of available seconds remaining for the free
Demo Mode. During this time, Demo Mode allows access to ALL CDM-570/570L FAST
options for 604800 seconds (7 full days). Demo Mode may be turned on and off an unlimited
number of times until the 604800 seconds have expired. The available time decrements only
when Demo Mode is On.
When the Demo period expires, the following message displays:
FAST Demo Mode: Off On
Demo Period Expired
IF THE DEMO MODE STATE (OFF/ON) IS CHANGED, OR IF DEMO MODE
IS ENABLED AND THE TIMER EXPIRES, THE MODEM FIRMWARE WILL
AUTO-REBOOT AFTER 5 SECONDS.
NOTE THAT VALIDATION OF AUTHORIZED FAST OPTIONS OCCURS ON
AUTO-REBOOT; IF AN INVALID CONFIGURATION IS FOUND, THE
MODEM CONFIGURATION WILL RESET TO DEFAULT VALUES.