Comtech EF Data CDM-570 - Manual (Page 374)

CDM-570/570L Satellite Modem with Optional IP Module Revision 12
Appendix D MN/CDM570L.IOM
D–24
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction Code
and Qualifier)
Response to
Query
Software
Information N/A variable Query only.
Complete unit software information.
Example: FRW=
Boot:
FW/10804-1-,1.1.1,03/30/04
Bulk1:
FW/10805AW,1.6.14,12/06/11
FW/10806-1AW,1.6.14,12/06/11
FW/10807-1L,1.7.0,08/26/09
FW/10808-1G,1.1.8,02/14/06
FW/10809-1-,1.1.1,03/30/04
Bulk2:
FW/10805AV,1.6.13,06/25/11
FW/10806-1AV,1.6.13,06/25/11
FW/10807-1L,1.7.0,08/26/09
FW/10808-1G,1.1.8,02/14/06
FW/10809-1-,1.1.1,03/30/04
N/A FRW? FRW=x….x
(see Description of
Arguments)
Initialize Events
Pointer IEP= None Command only.
Resets internal pointer to allow RNE? queries to start at the beginning of the stored
events log.
IEP=
IEP# N/A N/A
Software Image IMG= 1 byte,
value of 1 or 2 Command or Query.
Current Active software image, where:
1=Bulk Image # 1 currently active
2=Bulk Image # 2 currently active
Example: IMG=1 (Image #1 active) IMG=
IMG?
IMG*
IMG# IMG? IMG=x
(see Description of
Arguments)
IP Address IPA= 18 bytes,
numerical Command or Query.
Used to set the IP address and network prefix for the 10/100 BaseT Ethernet
management port, in the form xx.xxx.xxx.xxx.yy, where:
xxx.xxx.xxx.xxx is the IP address
yy is the network prefix (8-30)
Example: 010.006.030.001.24 IPA=
IPA?
IPA*
IPA#
IPA? IPA=
xx.xxx.xxx.xxx.yy
(see Description of
Arguments)
Initialize Statistics
Pointer ISP= None Command only.
Resets internal pointer to allow RNS? queries to start at the beginning of the
statistics log.
ISP=
ISP# N/A N/A