Comtech EF Data CDM-570 - Manual (Page 399)

CDM-570/570L Satellite Modem with Optional IP Module Revision 12
Appendix E MN/CDM570L.IOM
E–13
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to Query
Description of Arguments
Response to
Command
Query
(Instruction Code
and Qualifier)
Response to
Query
TX Payload
Compression
enable/disable TPE= 1 byte, value of 0, 1,
2 or 3 Command or Query, where:
0=Disabled
1= Enabled (Managed Switch Only mode)
2 = PerRoute (read-only when FAST feature is purchased in router
mode)
3 = Unavailable (read-only when FAST feature not purchased)
Acts as command, only in Managed Switch mode. In router mode, it’s read-only.
Enables or disables the Transmit 3xDES feature.
Restriction: Cannot enable if the 3xDES FAST feature has not been purchased TPE =
TPE!
TPE? TPE =x
(see description of
arguments)
3xDES Encrypt Key DEK[1..8]= 48 bytes, numerical Command or Query.
3xDES encrypt key [192-Bit], where all are Hexadecimal digits. [0…F], a total of
48 Hex digits.
Example: DEK[1]= 222222222222222244444444444444446666666666666666
DEK =
DEK!
DEK[1..8]? DEK= x [1..48]
(see description of
arguments)
3xDES Decrypt Key DDK[1..8]= 48 bytes, numerical Command or Query.
3xDES decrypt key, where all are Hexadecimal digits. [0…F], a total of 48 Hex
digits.
Example: DDK:0= 222222222222222244444444444444446666666666666666
DDK =
DDK!
DDK[1..8]? DDK =x [1..48]
(see description of
arguments)
SMTP Server IP
Address SIA= 15 bytes,
numerical Command or Query.
Used to set the IP address of the SMTP server where mail should be sent, in the
format:
xxx.xxx.xxx.xxx is the IP address
Example: <1/SIA=010.006.030.001.
When not configured, it returns >0001/SIA=0.0.0.0 SIA =
SIA!
SIA? SIA =
xx.xxx.xxx.xxx (see
description of
arguments)
SMTP Domain
Name SDM= 128 bytes,
characters, no
spaces Command or Query.
SMTP Domain name of up to 128 characters. To delete the domain name, issue
<1/SDM=
Empty string will delete the domain name.
Example: SMTP=somedomainname SDM =
SDM!
SDM? SDM =x [1..128]
(see description of
arguments)
SMTP Destination
Name SDN= 128 bytes,
characters, Command or Query.
SMTP Destination name of up to 128 characters. To delete the destination name,
issue <1/SDN=
Empty string will delete the domain name.
Example: <1/SMTP=somedestinationname SDN =
SDN!
SDN? SDN =x [1..128]
(see description of
arguments)
SNMP
Read Community SRC= 255 bytes,
characters, no
spaces Command or Query.
SNMP read community string. Empty string is not allowed
Example: <1/SRC=public SRC =
SRC!
SRC? SRC =x
(see description of
arguments)