Comtech EF Data CDM-570 - Manual (Page 408)

CDM-570/570L Satellite Modem with Optional IP Module Revision 12
Appendix E MN/CDM570L.IOM
E–22
E.5.5 Operations and Maintenance Commands and Queries
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction Code
and Qualifier)
Response to
Query
Upgrade Slot USI= 1 bytes, value of
0,1 or 2 Command or Query.
Slot to upgrade new IP firmware where,
0= Oldest
1=Image 1
2=Image 2
Example: UPS=0 USI =
USI!
USI?
USI=x
(see description of
arguments)
Software Revision N/A 34-37 bytes Query only.
Unit returns the value of the internal software revision installed in the unit, in the
form :
Example: >0001/SWR=Boot:1.1.1 Bulk1:1.5.1u Bulk2:1.5.1P SWR! SWR? SWR=Boot:x.y.zz
Bulk1:x.y.zz
Bulk2:x.y.zz
(see description
of arguments)
IP Software
Information N/A String Query only.
Complete IP software information:
Example: FRW=
System time is THU DEC 22 14:53:50 2005
Booted using image #1
Using configuration parameters from PARAM #1 IFW! IFW? IFW =x….x
(see description of
arguments)
Type Date Time Name Rev Len
Boot 1/24/2006 15:26 FW/10873-1c 1.1.3
460804
chr(13)
IP Bulk#1 12/27/2005 17:27 5.3 Pre 1.5.3
2607240
chr(13)
IP Bulk #2 12/14/2005 14:19 5.3 Pre 1.5.3
2604308
chr(13)
EVENT LOG 02/01/2006 14:10 Eventlog 1.5.3
128000
chr(13)
PARAM 1/26/2006 18:29 Console 1.5.3
5160
chr(13)
BaseBoot 03/30/2004 -- -- FW/10804-1- 1.1.1
----
chr(13)
BaseBulk #1 01/26/2006 -- -- FW/10805T 1.5.1N
----
chr(13)
BaseBulk #2 01/04/2006 -- -- FW/10805R 1.5.1g
----
chr(13)
chr(10)