3 receive hdlc channel addresses page – Comtech EF Data CDM-570 User Manual
Page 291

CDM-570/570L Satellite Modem with Optional IP Module
Revision 12
Ethernet IP Module - CLI and Telnet Operation
MN/CDM570L.IOM
14–21
14.2.3.3
Receive HDLC Channel Addresses Page
Activate the Receive HDLC Channel Addresses page from the Satellite/HDLC Interface page.
Use this page to define up to four HDLC addresses that can carry user information on the Satellite
Interface. This page is displayed only when using IP Module V1 Firmware Ver. 1.6.# and earlier
/ IP Module V2 Firmware Ver. 2.1.# and earlier.
Figure 14-13. Receive HDLC Channel Addresses page
The Receive HDLC Channel Addresses page contains the following options/fields:
Selection
Entry Description
HDLC Addr 1 – 4
1 – 4
HDLC address in hex <1 – FFFE, enter = 0001>
Note: HDLC addresses are not used in Point-To-Point Mode.
Small Network Mode (up to 254 addresses) – Limited to valid addresses
between the values of 0x01 and 0xFE.
Large Network Mode (up to 32766 addresses) – Limited to valid
addresses between the values of 0x0001 and 0x7FFF.
Delete HDLC Addr
D
Enter the HDLC entry to delete <1...4>