Comtech EF Data CDM-570 - Manual (Page 162)

CDM-570 Satellite Modem with Optional IP Module Revision 12
Base Modem Web Server Interface MN/CDM570L.IOM
7–14
7.3.3.3 Config Mdm | AUPC
For details pertaining to AUPC configuration and operation, see Chapter 9.
AUTOMATIC UPLINK POWER CONTROL (AUPC).
Use this page to configure Automatic Uplink Power Control (AUPC).
Figure 7-10. Config Mdm | AUPC page
With AUPC, a local modem is permitted to adjust its own output power level in order to attempt
to maintain the E
b
/N
0
at the remote modem.
AUPC
• AUPC Enable: Use the drop-down menu to select AUPC operation as either Enabled or
Disabled.
• Rem Demod Target E
b
/N
0
: Type in a value, in dB, from 0.0 to 14.9.
• Tx Power Max Increase: Use the drop-down menu to select a value, in dB, from 0 to 9.
• Max Pwr Reached Action: Use the drop-down menu to set the action as No Action or
Generate Tx Alarm.
• Rem Demod Unlock Action: Use the drop-down menu to set the action as Go to Nominal
Power or Go to Maximum Power.
Click [Submit] to save changes made to this page.