6 alarm mask configuration – Comtech EF Data CDM-570 User Manual
Page 316

CDM-570/570L Satellite Modem with Optional IP Module
Revision 12
Ethernet IP Module - CLI and Telnet Operation
MN/CDM570L.IOM
14–46
14.2.9.6
Alarm Mask Configuration
Activate the Alarm Mask Configuration page from the Configuration page.
Figure 14-31. Alarm Mask Configuration Page
The Alarm Mask Configuration page contains the following options/fields:
Selection
Entry
Description
Tx FIFO
A
Select as Masked or Unmasked.
NOTE: This setting should always be set as Masked with IP as the data
interface.
G.703 BPV
B
Tx AIS
C
RX AGC
D
E
b
/N
0
E
Select as Masked or Unmasked.
Rx AIS
F
Buffer Slip
G
Select as Masked or Unmasked.
NOTE: This setting should always be set as Masked with IP as the data
interface.
External Reference
H
Select as Masked or Unmasked.
BUC
I
LNB
J