Appendix e. cdm/cdd nmcs protocol – rev 1.0, E.1 revision history, E.2 introduction – Comtech EF Data CDM-570 User Manual
Page 387

E–1
Appendix E. CDM/CDD NMCS PROTOCOL –
REV 1.0
E.1
Revision History
Date
Rev
Author
Comments
10/4/2004
Draft 1.0
Wallace Davis
Created for Internal Distribution
3/1/2005
Draft 1.1
Bryan Wilcutt
Modifications for implementation
6/27/2005
Rev 1.0
Bryan Wilcutt
Released revision
11/10/2005
Rev 1.0
Harish Talanki
Modifications
E.2
Introduction
This appendix defines the Remote Control-based interface used for the CDM/CDD family of Comtech EF Data products. The primary
interface is to be Telnet; however, other interfaces may adapt to the CiM implementation, programmatically, via specific API calls.