BayTech RPC Single-phase Conbined QS - Manual (Page 55)

RPC with or without Ethernet
54
Select 3), Delete Group to delete a specific outlet group, the RPC displays the following:
Select 4), Rename Group to rename an outlet group’s name, the RPC displays the selected group:
Select 5), Modify Outlets in the Group and the RPC displays:
Example of an outlet change by retyping the group with the new outlets:
Select 6), Delete All Outlet Groups and the RPC displays:
Note: There will be no confirmation the groups have been deleted. Select option 1 from the
Outlet Group Configuration to verify all outlet groups were deleted.
Web Server Configuration
Refer to the Web Server Configuration menu under the Network Port Configuration.
Radius Configuration
Refer to the Radius Configuration menu under the Login Setup menu above.
Unit Reset
Select RU), to reset the unit to the current configurations, the RPC will display:
# Group Name Outlets
Strike ENTER to continue
Enter group number to be deleted: 3
Group deleted
Enter number of group to be renamed: 3
Outlet group is currently defined as:
# Group Name Outlets
3 2.1.9,2.1.10,2.1.11,2.1.12
Enter name for outlet group (max 23 characters): Radius
Enter number of group to be modified: 4
Outlet group is currently defined as:
# Group Name Outlets
4 Server backup 2.1.13,2.1.14,2.1.15,2.1.16
List up to four outlets in the following form mod.port.outlet,mod.port.outlet
2.1.13,2.1.14,2.1.17,2.1.18
Delete ALL outlet groups? (Y/N): y
Reset Unit? (Y/N)