BayTech RPC Single-phase Conbined QS - Manual (Page 34)

RPC with or without Ethernet
33
Configuration Status:
Status used to view the current configuration of network setup, login setup, SNMP and Web
configuration and RADIUS server information.
Serial Port Configuration
Handshaking, Baud Rate, Word Size, Stop Bits, and Parity are configured through either the serial or
Ethernet ports using the menus. RTS and DTR Line Drivers can only be configured through the phone
line via a modem. The default settings are 9600bps, 8 data bits, no parity, one stop bit, RTS and
DTR High.
IMPORTANT: Communications with the terminal computer connected to the port will be lost
until the serial port configuration of the terminal computer matches the RPC serial port.
Installed Modules :01
Attention Character is ......... ;
Disconnect Time Guard is........ Disabled
Port ID Echo is................. Disabled
Module Name is.................. Universal RPC
Network Connectivity & Login Configuration:
Ethernet Address................ 00:C0:48:35:DD:40
IP Address...................... 192.168.2.214
Subnet Mask..................... 255.255.255.0
Default Gateway................. 192.168.2.1
Inactivity Timeout (mins)....... Disabled
Break Length (msecs)............ 350
Telnet.......................... Enabled
SSH............................. Enabled
DHCP............................ Disabled
Telnet login prompt is.......... Enabled
Serial login prompt is.......... Disabled
Direct Port Connection is....... Disabled
SNMP & Web Configuration:
SNMP Agent is................... Enabled
SNMP Trap Host 1 Address........ 192.168.2.130
SNMP Trap Host 2 Address........ 0.0.0.0
SNMP Trap Host 3 Address........ 0.0.0.0
SNMP Trap Host 4 Address........ 0.0.0.0
SNMP Read-Only Community........ public
SNMP Read-Write Community....... private
Web Server is................... Enabled
Web Login is.................... Disabled
Web Secure Connection is........ Disabled
Web Activity Timeout is......... Disabled
Radius Setup:
Radius Logins are............... Disabled
Radius Primary Server Address... 0.0.0.0
Radius Backup Server Address.... 0.0.0.0
Radius Secret................... HardlyASecret
Radius Login Timeout............ 5
DS62 Usernames as Backup is..... Disabled