BayTech RPC Single-phase Conbined QS - Manual (Page 30)

RPC with or without Ethernet
29
Network Status
Network Status contains the MAC address, IP address, Mask, TX/RX packets and their status.
Logged Users
This option shows the name of the user account, the type of interface (serial or network) and the status
of the active sessions.
Terminate a session by typing “T” at the prompt. The RPC will display the following:
Enter number of connection to terminate, CR :
System Status:
Available local memory: 7598080
TCP sockets in use: 0
System up time (dd:hh:mm:ss): 0:00:50:10
Press ENTER to continue
eth0 Link encap:Ethernet HWaddr 00:C0:48:00:01:FD
inet addr:192.168.2.136 Bcast:192.168.2.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
Base address:0x840
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
Press ENTER to continue
C=configuration user *=current process
Active Users:
# USER FROM INTERNAL CONN STATUS PID
1 root localhost Normal 23
C 2 root 70.150.140.69 Normal 490
* 3 root 70.150.140.66 Normal 492
Strike T, CR to terminate a connection/process, CR to continue :