BayTech RPC Single-phase Conbined QS User Manual
Page 38
RPC with or without Ethernet
37
Attention Character
Pressing the Attention Character 5 consecutive times will access the network main menu. The Default
is a semi-colon (;). Select this option to change the attention character. The RPC displays the
following:
Disconnect Timeguard
This feature ensures reliable binary data transmission by providing a one-second “Timeguard” after the
RPC-Series receives the attention character. If more data is received within the delay period, the RPC
treats the character as data, not an attention character; thereby preventing unwanted port disconnection.
The Default setting is Disabled.
Connect Port ID Echo
When a user logs into the RPC unit the port is identified in the following example:
Select option 1, followed by a
setting is Disabled.
Select option 2 to echo the module and port number.
Select option 3 to echo the device name.
Login Setup Menu
This menu allows the admin user to enable or disable the Access Control, Manage Users, Direct Port
Connection, Radius, and TACACS configuration. Depending on the firmware installed the Login
Setup menu may be slightly different than what is shown below.
Port ID Echo is...................Disabled
Connect Port ID Echo Menu
Disable Port ID Echo..............1
Use Module, Port Number...........2
Use Device Name...................3
Exit..............................X,CR
Enter Request :
Attention Character is........... ;
Enter Attention Character :
Disconnect Time Guard is.......... Disabled
Enable ? (Y/N), CR for no change) :
BAYTECH
For further information check:
http://www.baytech.net/
RPC3DE-20
<=
Device name Port echo.
or
02,1
<=
Module and Port Number echo.
RPC-3/4(A)DE Series
(C) 2004 BayTech