BayTech RPC Single-phase Conbined QS - Manual (Page 15)

RPC with or without Ethernet
14
Figure 4
Manage User
The User Menu allows the admin user to add and delete users, change passwords, and change the
outlet list that displays a user’s access to prescribed outlets. Select “Manage Users,” from the
configuration menu and the following menu appears if the unit has been reset or initial setup:
Figure 5
NOTE: User in position (1) will be the ‘admin user’ for the outlets. Older units will not display
the ‘delete’ option until a user is added.
Add a User:
Select A), “Add user,” from the User Management Menu. Enter the name of the user to be added,
followed by . NOTE: User name is case sensitive.
Assigned Outlets
Select a user number from the User Management Menu, the RPC unit will display the Assign Outlet
Menu:
RPC>config
Unit ID: RPC3ADE-20
1)...Manage
Users Add/Delete/Rename, assign outlets
2)...Change Outlet Name Select an outlet to change its name
3)...Enable/Disable Confirmation Confirmation (Y/N)
4)...Enable/Disable Status Menu Opening status of outlets
5)...Change Unit ID As written
6)...Change Alarm Threshold As written
X)...Exit
-------------------------------------------
| User | Assigned Outlets |
| | 1| 2| 3| 4| 5| 6| 7| 8|
-------------------------------------------
-------------------------------------------
A)...Add User
D)...Delete User
R)...Rename User
G)...Change Outlet Group
Enter user number to assign Outlets, A, D, G or R.
Enter Request: