BayTech RPC Single-phase Conbined QS User Manual
Page 24
RPC with or without Ethernet
23
User Management
The User Menu allows the admin user to add and delete users, change passwords, and change the
outlet list that displays a user’s access to prescribed outlets. Select “Manage Users,” from the
configuration menu and the following menu appears if the unit has been reset or initial setup:
If optional outlet users have been added, the following User Menu will show the users.
NOTE: the first assigned user will be the ‘admin user’ for the outlets. Older units will not
display the ‘delete’ option unit a user is added.
Add a User:
If the “Add user” option is NOT present than the maximum number of users have been assigned. You
may get a message saying ‘No more users can be added’.
Select A), “Add user,” from the User Management Menu. The RPC Unit will display the following:
Enter the name of the user to be added, followed by
the added user.
NOTE:
User name is case sensitive.
Delete a User:
Select D), “Delete user,” from the User Management Menu. The RPC Unit will display the following:
Type the number of the user to be deleted, followed by
minus the deleted user.
-------------------------------------------
| User | Assigned Outlets |
| | 1| 2| 3| 4| 5| 6| 7| 8|
-------------------------------------------
-------------------------------------------
A)...Add User
D)...Delete User
R)...Rename User
G)...Change Outlet Group
Enter user number to assign Outlets, A, D, G or R.
Enter Request:
-------------------------------------------
| User | Assigned Outlets |
| | 1| 2| 3| 4| 5| 6| 7| 8|
-------------------------------------------
1)...johnt | N| N| N| N| N| N| N| N|
-------------------------------------------
A)...Add User
D)...Delete User
R)...Rename User
G)...Change Outlet Group
Enter user number to assign Outlets, A, D, G or R.
Enter Request:
Enter user name:
Enter number for user to delete: