BayTech RPC Single-phase Conbined QS User Manual
Page 41
RPC with or without Ethernet
40
Select 3), Radius Backup Server Address is used to specify the backup server IP addresses.
Select 4), Radius Secret is used to set the shared radius secret. A secret can be up to 16 characters and
must be exactly the same as the secret stored on the server.
Select 5), In case all specified radius servers are unavailable, enabling DS62 usernames as backup
login allows an unsecured access until` the RADIUS server becomes available.
Select 6), Radius login timeout is the amount of time the RPC will wait for a response from the radius
server after sending the login message to the radius server. A timeout on a radius response is treated,
per RFC specifications, as a rejection from the radius server.
Network Port Configuration
This menu is used to change the network configuration options such as the IP Address, Subnet Mask,
Gateway, DHCP, and Telnet; all of which are necessary during initial startup. The Connection
Inactivity Timeout allows you to enable/disable whether the firmware will end your session or “times
out.” The default is 1 hour, but when disabled there is no set time out. Disabling the Carriage Return
Translation allows you to bypass all unnecessary carriage returns, and it will send you straight to the
next “end of line.” The DHCP, Telnet, SSH, options is to enable or disable these functions. SSH host
key Generator allows the user to generate a host key which is used in the SSH encryption process. IP
Filter allows or blocks specific IP Addresses,
SNMP provides a message format for communication
between a computer and your devices, and Web Server Configuration allows web access and sets up
options for each.
Radius response timeout is 5 seconds
Enter timeout, in seconds ( >=5 and <=30 ) :
Radius Server IP Address is: 0.0.0.0
Enter radius server address in dotted decimal form :
Radius Backup IP Address is: 0.0.0.0
Enter radius server address in dotted decimal form :
Radius secret is: HardlyASecret
Enter radius secret (16 chars max).
:
DS62 usernames as backup login is Disabled
Enable ? (Y/N), CR for no change) :