BayTech RPC Single-phase Conbined QS - Manual (Page 32)

RPC with or without Ethernet
31
Processes
Processes are a list of commands used by the firmware to operate.
Type ‘T’, and the unit displays:
Enter a PID number and press ‘Enter’ to terminate the process.
IMPORTANT: If a process is terminated, the functionality of the unit maybe interrupted. To
reestablish the unit’s functionality, power the unit off than on.
UnitInfo Database
PID PORT STAT SIZE SHARED %CPU COMMAND
1 S 133K 0K 0.2 init
2 S 0K 0K 0.0 keventd
6 S 0K 0K 0.0 kupdated
11 R 43K 0K 99.3 baytechd
12 S 13K 0K 0.1 mdmautologind
13 S0 S 13K 0K 0.1 /bin/autologind
14 S 14K 0K 0.0 /bin/inetd
17 S 133K 0K 0.1 rpccmdd
18 S 13K 0K 0.0 snmppolld
19 S 1833K 0K 0.0 snmpd
25 S0 R 71K 0K 1.0 ds62
Strike T, CR to terminate a connection/process, CR to continue :
Enter PID process to terminate, CR:
unitInfo->portUser 0
unitInfo->cfgUser 0
unitInfo->connState 0
unitInfo->connPid 0
unitInfo->buildUserTableFlag 0
unitInfo->kill_poller 0
unitInfo->background_polling=0
bcTable->connAttempt=0
hit ENTER to continue