Configuration menu, Display current electrical characteristics – BayTech RPC Single-phase Conbined QS User Manual

Page 22

RPC with or without Ethernet

Type “Y” for yes or “N” for no. The status of Outlet 1 will be changed to ‘Locked’. Likewise, typing
‘LOCK ALL’, ‘LOCK 0’, or ‘LOCK’ at the RPC > prompt and responding “Y” for yes, locks all
outlets. The UNLOCK n command works similarly as the LOCK n command.

Configuration Menu

The Outlet Configuration Menu allows the ‘admin’ user to manage the Users, Outlet Name,
Confirmation menu, Status menu, Unit ID, and Alarm threshold.

NOTE: If the unit display with the following message, “Configuration mode in use” A user
in the other port is in the “Configuration” menu.

Display Current Electrical Characteristics:

Type ‘current’ at the prompt to show the unit’s True RMS Current and Peak RMS Current, and the
RPC will display the following:

Type ‘clear’ at the prompt to reset the Peak RMS Current, the RPC will redisplay the status menu with
the new maximum detected current.

Type ‘voltage’ at the prompt to display the unit’s True RMS Voltage, and the RPC will display the
following:

Type ‘power’ at the prompt to show the unit’s Average Power and the RPC will display the following:

Type ‘temp’ at the prompt to show the unit’s current temperature, the RPC will display the following:

NOTE: RPC units with external sensor ports will be displayed as Ext 1 and/or Ext 2.

RPC>lock 1,
Lock Outlet 1 (Y/N)? y

Internal Temperature: 83.3 F Ext. 2: 76.5 F

This manual is related to the following products:

Combined RPC Quick Start