BayTech RPC Single-phase Conbined QS - Manual (Page 54)

RPC with or without Ethernet
53
NOTE: The type ‘Contact’ signifies the unit does not recognize or detect a probe, but still be
able to send SNMP Traps.
Select the specific option to set the High and Low alarm ranges and their corresponding SNMP traps.
Outlet Groups
This is a future option not currently used. This option sets up the outlets into groups.
Select 1), List Outlet Groups to list any outlet groups, the RPC display:
Select 2), Add Group to add a specific outlet group, the RPC display:
The RPC displays the following and asks for a name for the new Group:
RPC/RPS External Environmental Sensor Configuration Menu
Sensor Number: All Name: all RPCs/RPSs Type: Temperature/Humidity/Air Flow
1...High Threshold (tenths of meas. unit): NP
2...High Threshold Trap Enable: NP
3...Low Threshold (tenths of meas. unit): NP
4...Low Threshold Trap Enable: NP
Enter Request :
Enter threshold value in tenths of unit measurement (degrees,%%,etc.):
Outlet Group Configuration:
List Outlet Groups...............1
Add Group........................2
Delete Group.....................3
Rename Group.....................4
Modify Outlets in a Group........5
Delete All Outlet Groups.........6
Enter Request :1
# Group Name Outlets
1 Router GP-A 2.1.1,2.1.2,2.1.3,2.1.4
2 Server Row 2.1.5,2.1.6,2.1.7,2.1.8
3 Radius 2.1.9,2.1.10,2.1.11,2.1.12
4 Server backup 2.1.13,2.1.14,2.1.15,2.1.16
List up to four outlets in the following form mod.port.outlet,mod.port.outlet
2.1.1,2.1.2,2.1.3,2.1.4
Outlet group is currently defineded as:
# Group Name Outlets
1 2.1.1,2.1.2,2.1.3,2.1.4
Enter name for outlet group (max 23 characters): Router GP-A