Basler Electric BE1-BPR - Manual (Page 5)

9272000990 Rev J BE1-BPR Introduction iii
REVISION HISTORY
The following information provides a historical summary of the changes made to the BE1-BPR hardware
and firmware. The corresponding revisions made to this instruction manual (9272000990) are also
summarized. Revisions are listed in reverse chronological order.
Firmware
Version and Date Change
3.33, 07/11
 Improved production testing at the factory.
3.32, 02/04
 Corrected PW command operation when used with B, F, or R
command suffix.
 Eliminated fault log data errors.
 Corrected HMI LCD flickering and the skipping of DIAG records when
certain diagnostic alarms are present.
 Corrected fault log data errors.
3.31, 02/02  Corrected over-range display error for primary current above 10 Aac
and a CT ratio less than 99.
3.30, 10/99  Added POSC command.
3.29, 06/99  Corrected operation of Ti parameter in BKRCON setting.
3.27, 01/99
 Implemented new device serial number format.
3.26, 11/98
 Added fourth password level for OUT command.
 Modified ACCESS command so that password access can be
obtained in multiple access areas simultaneously.
 Added ID screen to front panel HMI.
 Removed extraneous text from settings reported by the SHOWSET
command.
3.23, 08/97  Changed time delay setting (TD command) range and recloser time
delay setting (TD79 command) range from 0 to 60 seconds to 10
milliseconds to 60 seconds. A setting of 0 disables the timer.
 Changed the minimum input contact recognition and debounce timer
(LI command) from 1 millisecond to 4 milliseconds.
3.22, 02/97  Corrected PHOLD command operation in regard to the recloser (79)
Close output.
3.21, 11/96
 Improved pickup and dropout performance at very low pickup
settings.
 Added Model/Program screen to the list of Maintenance screens
available at the front panel HMI.
3.03, 06/96  Eliminated sporadic LO command errors.
3.02, 06/96  Resolved communication errors during RS-485 multidrop operation.
3.00, 12/94
 Initial release
Manual
Revision and Date Change
J, 04/12  Minor text edits.
I  This revision letter not used.
H, 05/08
 Added information for model numbers 9272000328, 9272000329,
9272000330, and 9272000331.
 Updated Table 1-4, Contact Sensing Burden.