Basler Electric BE1-BPR - Manual (Page 178)

C-4 BE 1-BPR Relay Settings Rec ord 9272000990 Rev J
Recloser = Time, mSec
TD791 =
TD792 =
TD793 =
TD79R =
TD79F =
TD79M =
The following settings require any access (PW1, PW2, PW3).
Global I/O Settings
CT Ratio = Ratio, Turns
CTP =
CTN =
Output Hold Attribute = Hold, 0,1 Mask xxxxx
PHOLD =
Display and Communication Settings
Identifier Information = Relay #, 0-65535--Used in COMTRADE file as "rec_dev_id" field
SNAME =
ID Information-2nd Line = ,Station ID, 30 Char--Used in COMTRADE file as "station_name" field
SNAME = ,
Clock Display Mode = Date, M or D , Time, 12 or 24
PCLK = ,
LCD Default Display = Menu Branch # , Screen #
PDISPLAY = ,
Communications
Front RS232 Port = Baud DPS , Reply Ack, A0,1 , Echo Mode, E0,1 , HW Handshake,
COM0 = , , ,
Front RS232 Port--2nd Line = , Page Length,P0-99 , SW Handshake, X0,1
COM0 = , ,
Rear RS232/RS485 Port = Baud DPS , Reply Ack, A0,1 , Echo Mode, E0,1 , HW Handshake,
COM1 = , , ,
Rear RS232/RS485 Port-2nd Line = , Page Length,P0-99 , SW Handshake, X0,1
COM1 = , ,
Fault Recording Settings
Targets = IN, 0,1 Mask xxxxxxx , OUT, 0,1 Mask xxxxx
PTARGET = ,
Oscillography Trigger = Logic Variable
TRIGGER =
Alarm Settings
Timer Log Settings = Timer Stop Logic , Type,L=under,H=over , Remaining Time Threshold, mSec.
PTLOG1 = , ,