Figure a-2. com properties dialog box – Basler Electric BE1-BPR User Manual
Page 168
A-2
BE1-BPR Terminal Communication
9272000990 Rev J
Figure A-2. COM Properties Dialog Box
Step 7: Click File/Properties on the menu bar. Click the Settings tab.
a. Make the following selections:
Check the Terminal Keys radio button.
Select VT-100 emulation.
Set the Backscroll Buffer to the maximum setting of 500.
b. Click the ASCII Setup button. Make the following selections using Figure A-3 as a guide:
Place a check at Send line ends…
ASCII Sending
Place a check at Echo typed characters…
Select a Line delay setting of 100 to 200 milliseconds.
Disable Append line feeds…by leaving the box unchecked.
ASCII Receiving
Disable Force incoming… by leaving the box unchecked.
Place a check at Wrap lines…
c. Click “OK”.
d. Click “OK”.
Step 8: Click File and click Save.
NOTE
Settings changes do not become active until the settings are saved.