Basler Electric BE1-BPR - Manual (Page 169)

9272000990 Rev J BE1-BPR Terminal Communication A-3
Figure A-3. ASCII Setup Dialog Box
Step 9: HyperTerminal is now ready to communicate with the relay. Table A-1 describes the required
connection for each RS-232 port.
Table A-1. RS-232 Communication Ports
Connection Type
Front Port 9-pin female DCE
PC to Front RS-232 port cable Straight
Rear Port 9-pin female DCE
PC to Rear RS-232 port cable Straight
WINDOWS® VISTA
HyperTerminal is not provided with Windows Vista. Stand-alone software can be used to communicate
with a BE1-BPR relay. The configuration of stand-alone software is similar to that of HyperTerminal.