Basler Electric BE1-BPR User Manual
Page 134
6-6
BE1-BPR Communications
9272000990 Rev J
COM Command
Purpose:
Reads or changes the communications protocol
Syntax:
COM[x][=
Reference:
Section 4, Functional Description, Software Functional Description, Maintenance,
Communication Settings
CT Command
Purpose:
Reads or changes the current transformer ration settings.
Syntax:
CT[t][=
Reference:
Section 4, Functional Description, Relay Setup, Transformer Ratios
DATE Command
Purpose:
Reads or changes the date setting.
Syntax:
DATE[=
Reference:
Section 4, Functional Description, Maintenance, Time and Date
DIAG Command
Purpose:
Reads or resets diagnostic information.
Syntax:
DIAG[=0]
Reference:
Section 4, Functional Description, Relay Status
DLOG Command
(Enhanced Relays Only)
Purpose:
Reads or changes breaker contact duty log data.
Syntax:
DLOG[P][=
Reference:
Section 4, Functional Description, Breaker Status, Breaker Contact Duty Diagnostics
(Enhanced Relays Only)
FLOG Command
(Enhanced Relays Only)
Purpose:
Reads a listing of all fault records, reads summary information about any individual fault
record or clears all fault records.
Syntax:
FLOG[#][=0]
Reference:
Section 4, Functional Description, Fault Log (Enhanced Relays Only), Fault Log Listing
FLT Command
(Enhanced Relays Only)
Purpose:
Obtains a COMTRADE report.
Syntax:
FLT<#>
Reference:
Section 4, Functional Description, Fault Log , Oscillographic Data Acquisition
FREQ Command
Purpose:
Reads or changes the nominal power system frequency information used by the relay.
Syntax:
FREQ[=
Reference:
Section 4, Functional Description, Maintenance, Calibrating the Analog Channels
HELP Command
Purpose:
Obtains helpful information about communication port commands.
Syntax:
HELP[x/
Reference:
Section 4, Functional Description, Software Functional Description, Introduction
I Command
Purpose:
Reads the primary current value of all or individual phases.
Syntax:
I[
Reference:
Section 4, Functional Description, Software Functional Description, Relay Status