Basler Electric BE1-BPR - Manual (Page 174)

B-2 BE1-BPR Commands Summary 9272000990 Rev J
∗ = Enhanced Relays Only HMI Menu Branch
Command Function
Standard
Models
Enhanced
Models
POSC[=x]
∗ Read/program the number of fault records
saved.
N/A N/A
PTARGET[=,] Read/program the target data format. N/A N/A
PTLOG[x[=[,]]] Read/program timer log logic, alarm type,
and alarm time.
N/A N/A
PU[x][=[,]] Read/change an overcurrent pickup level. 1 1
PW[<#>[=,]] Used to change the password. 5 6
QUIT Exit programming mode w/o saving
changes.
N/A N/A
RESET Reset latched target data. 0 0
SAVE Exit programming mode and save changes. N/A N/A
SHOWSET Read relay setup parameters. N/A N/A
SNAME[=<#>,]
∗ Read/change station name for the
COMTRADE report.
N/A N/A
STATUS Read status of inputs and outputs. 2, 3 2, 3
TARGET Read target data. 0 0
TD[x][=] Read/change timer delay setting. 1 1
TD79[n][=] Reads/changes a recloser (79) timer delay
setting.
1 1
TEST Read diagnostic data. N/A N/A
TIME[= Read/change the time. 5 6
TLOG[#] Read timer log. 4 4
TRIGGER[=/Y]
∗ Read/change trigger logic or trigger a fault
record.
N/A N/A
VER Read Model, SN, PN, and program data. 5 6