11 trigger scpi command subsystem, 1 trigger scpi command summary, 2 trigger scpi command reference – AMETEK M130 User Manual
Page 79: Trigger scpi command subsystem -29, Trigger scpi command summary -29, Trigger scpi command reference -29, 11 trigger, Scpi
Sorensen Ethernet Option
IEEE 488.2 and SCPI Command Operation
M130/M131 Programming Manual
3-29
3.11 TRIGGER
SCPI
C
OMMAND
S
UBSYSTEM
3.11.1 TRIGGER
SCPI
C
OMMAND
S
UMMARY
TRIGger[n]
:ABORt
:RAMP
:TYPE <1|2|3>
3.11.2 TRIGGER
SCPI
C
OMMAND
R
EFERENCE
Command
Description
SCPI
TRIGger[n]
Trigger subsystem. N = 0, 1-31. The default
channel is 1. A value of n = 0 will program all
channels.
C
:ABORt
Clears all settings of voltage and current
upon trigger.
N
:RAMP
Implements current or voltage ramping
function previously programmed by the
SOURce:CURRent:RAMP or
SOURce:VOLTage:RAMP commands.
N
:TYPe<1|2|3>
Implements voltage and current values
previously programmed by the
SOURce:CURRent:LEVel:TRIGger and
SOURce:VOLTage:LEVel:TRIGger
commands.
Valid arguments are 1 (Voltage),
2 (Current), or 3 (Both).
N