AMETEK M130 - Manual (Page 63)

Sorensen Ethernet Option IEEE 488.2 and SCPI Command Operation
M130/M131 Programming Manual 3-13
Command Description SCPI
:GAIN Sets the value of the gain for current
measurements. N
:OFFSet Sets the value of the offset for current
measurements. N
:POINt <1|2> <0+NRf> Sets the current measurement calibration
point (1 or 2). The actual output current is
measured with an external meter. N
:VOLTage N
:ADC? Returns the integer value of the A/D for the
voltage measurement. N
:CALCulate Calculates the value of the gain and offset
for voltage measurements. N
:GAIN Sets the value of the gain for voltage
measurements. N
:OFFSet Sets the value of the offset for voltage
measurements. N
:POINt <1|2> Sets the voltage measurement calibration
point (1 or 2). The actual output voltage is
measured with an external meter. N
:MODEL
:LASTCALDATE
Sets the date last calibrated.
Order: Month Day Year.
:LASTCALDATE? Returns the date last calibrated.
:NEXTCALDATE
Sets the due date for next calibration.
Order: Month Day Year
:NEXTCALDATE? Returns the due date for next calibration.
:OUTPut N
:CURRent N
:DAC <0+NR1> Sets the output of the output current D/A
converter. The value range is 0 – 4095 for
12-bit operations; 0-65535 for 16-bit. N
:FIVEPOINT <1|2|3|4|5>
<0+NRf> Sets the five current calibration values. N
:FIVEPOINT? Displays the set of five entered calibration
current values. N
:GAIN Sets the value of the gain for the output
current. N
:OFFSet Sets the value of the offset for the output
current. N
:VOLTage N
:DAC <0+NR1> Sets the output of the output voltage D/A
converter. The value range is 0 - 4095 for
12-bit operations; 0-65535 for 16-bit. N
:FIVEPOINT <1|2|3|4|5>
<0+NRf> Sets the five voltage calibration values. N
:FIVEPOINT? Displays the set of five entered calibration
voltage values. N
:GAIN Sets the value of the gain for the output
voltage. N