5 calibration scpi command subsystem, 1 calibration scpi command summary, Calibration scpi command subsystem -11 – AMETEK M130 User Manual
Page 61: Calibration scpi command summary -11, 5 calibration, Scpi
Sorensen Ethernet Option
IEEE 488.2 and SCPI Command Operation
M130/M131 Programming Manual
3-11
3.5 CALIBRATION
SCPI
C
OMMAND
S
UBSYSTEM
See Section 4 for calibration procedures.
WARNING
Please refer to the power supply manual for further information before
performing calibration procedures. Calibration must be performed by
qualified personnel who appropriately deal with attendant hazards. If
calibration is not performed properly, functional problems could arise,
requiring that the supply be returned to the factory.
3.5.1
CALIBRATION
SCPI
C
OMMAND
S
UMMARY
CALibrate[n]
:DATA
:INITial
:CURRent <0+NRf>
:VOLTage
[:AMPLitude]
:PROTection
:LOCK
:MEASure
:CURRent
:ADC?
:CALCulate
:GAIN
:OFFSet
:POINt <1|2> <0+NRf>
:VOLTage
:ADC?
:CALCulate
:GAIN
:OFFSet
:POINt <1|2>
:MODel
:LASTCALDATE
:LASTCALDATE?
:NEXTCALDATE
:NEXTCALDATE?
:OUTPut
:CURRent
:DAC <0+NR1>
:FIVEPOINT <1|2|3|4|5> <0+NRf>
:FIVEPOINT?
:GAIN
:OFFSet