Edit existing user, Figure 2-24) – AMETEK M130 User Manual
Page 44
Sorensen Ethernet Option
2-26
M130/M131 Programming Manual
EDIT EXISTING USER
Accessible from the Security Page by clicking the EDIT button after first
selecting the user’s name, this page allows you (a Full permissions user) to edit
the parameters for an existing user.
Figure 2-24. Edit Existing User Window from Security Page
When this page appears, the fields are populated with the selected user’s
existing parameters.
To edit:
1. Input appropriate information, as desired, in User ID (case-
sensitive, limited to 14 characters), in Password (case
sensitive, limited to 9 characters), and/or in Re-enter Password
fields.
2. Select permission level from the Permission dropdown.
3. To accept into the system, click SUBMIT or tap the
ENTER
key.
If your edit was successful, you will return to the Security page with a message
to that effect.
If there is an error in the editing process, you will stay in the Edit Existing User
page, and you will see a message in the EDIT EXISTING USER: line, describing
the reason for the error.
RESET clears the fields in which you input information.
CANCEL returns you to the Security page with a message verifying that the User
Edit was cancelled.