5 remote programming via rs-232, Remote programming via rs-232 -30, On 2.5 – AMETEK M130 User Manual
Page 48: Rs-232
Sorensen Ethernet Option
2-30
M130/M131 Programming Manual
2.5 R
EMOTE
P
ROGRAMMING
V
IA
RS-232
The M130’s RS-232 interface operates at 19.2K baud with 8 data bits, no parity, and 1
stop bit. All M130 commands are supported at the RS-232 interface. The RS-232
interface is accessible through the power supply’s rear panel 6-pin RJ-11 connector,
labeled RS232(485).
Figure 2-27. RS-232 Rear Panel RJ-11 Connector Pinout
Figure 2-28. M130 to PC RS-232 Connection (RJ-11 to DB-9)
This manual is related to the following products: