AMETEK M130 - Manual (Page 40)

Configuration Sorensen Ethernet Option
2-22 M130/M131 Programming Manual
• CLEAR RESPONSES: click this button to clear the response window of
previous responses.
STATUS
This page displays updated information for the following parameters:
Figure 2-21. Status Page
• Selected Channel: as in the Settings page, this is the selected power
supply channel whose information is presently displayed/updated
(1= Master channel, and 2 – 31 = Slave channels); you can select a
different channel to which you have access:
To select: Click and hold the drop-down button; you will see
only the channel numbers that you have rights to
access; highlight the desired channel number and
release the mouse button.
NOTE: If no channels are displayed, an
Administrator or a user with FULL permission (see
SECURITY, p. 2-24) must assign channel access
to the particular User ID, through the Security page