AMETEK M130 - Manual (Page 64)

IEEE 488.2 and SCPI Command Operation Sorensen Ethernet Option
3-14 M130/131 Programming Manual
Command Description SCPI
:OFFSet Sets the value of the offset for the output
voltage. N
:PROTection N
:CALCulate Calculates the value of the gain and offset
for output overvoltage protection. This takes
more than 30 seconds to complete. Use
*ESE 1 and a serial poll to detect the
completed operation. N
:DAC <0+NR1> Sets the output of the output overvoltage
protection D/A converter. The value range
is 0 – 4095 for 12-bit operations; 0-65535
for 16-bit. N
:GAIN Sets the value of the gain for the output
overvoltage protection. N
:OFFSet Sets the value of the offset for the output
overvoltage protection. N
:STORe Stores the calibration constants in non-
volatile memory. N
:UNLock Sets the non-volatile memory available to
store calibration constants. The access
string is “6867”. N