Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 94)

9.1 Technical Details
9 Technical Details
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
9-2
The standards current on 2009-03 apply.
SSI encoder
Voltage range
10 ... 30 VDC
, 4.75 ... 5.25 VDC
Output signal (clock) Differential signal (RS 422)
Max. number of bits on the counter input 12 - 25 Bit
Transmission rate
1,000.0 kHz
Coding of the input signal
Binary
, Grey
Signal at the data input Differential signal (RS 422)
Incremental encoder
Voltage range
10 ... 30 VDC
, 4.75 ... 5.25 VDC
Signal level at "1"
>= 2.5 V
Signal level at "0" <= 0.5 V
Phase position for the differential signals A,/A and B,/B 90° ±30°
Input resistance
0.3 kOhm
Maximum threshold frequency
0.5 MHz
Environmental data
Climatic suitability
EN 60068-2-14 , EN 60068-2-1, EN 60068-2-2, EN 60068-
2-30
, EN 60068-2-78
Ambient temperature in accordance withDIN EN 60721-3-
3 0 - 40 °C
Storage temperature in accordance withDIN EN 60721-3-
1 -25 - 55 °C
Climatic suitability in accordance with DIN EN 60721-3-3 85 % r. h. at 40 °C
Condensation Not permitted
EMC EN 61800-3
Vibration to
IEC 721-3-3
Protection type in accordance withEN 60529
Mounting (e.g. cabinet)
IP54
Housing IP20
Terminals
IP20
Airgap creepage in accordance with EN 61800-5-1
Overvoltage category
II
Pollution degree 2
Mechanical data
Housing material
Front
Steel 1,4016
Top Polyester foil
Dimensions
Height
142.0 mm
Width 18.5 mm
Depth 103.0 mm
Weight 150 g
Encoder input