Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 93)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
9-1
9.1 Technical Details
9 Technical Details
99000 Technical Details Technical Details 9- 9.1 Technical Details 9100 Technical Details 9- Technische Daten_S1
Technical details PMCprotego S1
Application range Failsafe
Electrical data
Supply voltage U
B
DC
24.0 V
Voltage tolerance -15 %/+20 %
Inputs
Number
9
Input voltage in accordance with EN 61131-2 type 1
24 V DC
Input current range 3.5 - 10.8 mA
Signal level at "1" 15 - 30 V DC
Signal level at "0"
-3 - +5 V DC
Pulse suppression
0.6 ms
Galvanic isolation yes
Outputs, single-pole
Number of positive-switching single-pole semiconductor
outputs
7
Short circuit-proof yes
Typ. output current at “1” signal and rated voltage of sem-
iconductor output
0.50 A
Monitoring threshold of semiconductor output
7.0 V
Permitted current range
0.50 A
Residual current at “0” signal 0.02 mA
Max. duration of on time during self test 200 µs
Max. duration of off time during self test 200 µs
Permitted loads
inductive
, capacitive, resistive
Outputs, dual-pole
Number of dual-pole semiconductor outputs
1
Short circuit-proof yes
Galvanic isolation
yes
Typ. output current at “1” signal and rated voltage of sem-
iconductor output
2.0 A
Monitoring threshold of semiconductor output
7.0 V
Permitted current range 2.00 A
Residual current at “0” signal 0.50 mA
Max. duration of on time during self test 200 µs
Max. duration of off time during self test
200 µs
Permitted loads inductive , capacitive, resistive
Times
Response time
4 ms
Error reaction time
2 ms
Encoder input
Number of inputs
1
Connection type Female 9-pin D-SUB connector
SSI encoder
Incremental encoder