Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 82)

7.3 Recommissioning
7 Commissioning
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
7-10
Procedure:
 Select Online Mode -> Download Project in the safety card's Con-
figurator.
Allgemein_Hinweis_Online_Hilfe
7.3.3.2 Download configuration to SD card
Download configuration to SD card 7- Inbetrieb_Konf_uebertragen_Tool_SD_Karte
You can download the configuration data to the safety card via an
SD card. The configuration data must first be saved to the SD card.
There are two options for downloading a configuration to an SD card:
1. option : Downloading a configuration via an SD card, which is writ-
ten by the PC.
Prerequisite:
– Connection to an external SD card read device
Procedure:
 Select Project -> Save to SD Card in the safety card's Configura-
tor.
 Remove the SD card from the external SD card read device and in-
sert it into the servo amplifier's SD card read device (continue
as described under "Download configuration from SD card to safe-
ty card").
2. option : Downloading a configuration via an SD card, which is writ-
ten by the servo amplifier.
Prerequisite
– Connection is established between the PC and servo amplifier
(RS 232 or Ethernet).
– An SD card must be inserted in the servo amplifier.
Procedure:
 Select
Online Mode -> Servo Amplifier Configuration -> SD
Card in the safety card's Configurator.
 Remove the SD card from the servo amplifier and insert it into the
SD card read device of the servo amplifier that you wish to config-
ure (continue as described under "Download configuration from
SD card to safety card").
Allgemein_Hinweis_Online_Hilfe
INFORMATION
Further information is available in the safety card Configurator's
online help.
2 5
2
3
5
6