Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 18)

3.2 Standards
3 Safety
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
3-4
3.2 Standards 3200 Standards 3- Sicherheit_Normen_Sicherheitskarte
Knowledge of and compliance with the relevant standards and direc-
tives are a prerequisite for using the safety card. The following standards
are relevant:
 EN 61326-3-1:2008: Electrical equipment for measurement, control
and laboratory use - EMC requirements
 EN 61800-3:2004: Adjustable speed electrical drives
 EN 61800-5-2:2007: Adjustable speed electrical power drive systems
– Part 5-2: Safety requirements. Functional
 EN ISO 13849-1:2008: Safety of machinery – Safety-related parts of
control systems – Part 1: General principles for design, Part 2: Valida-
tion
 EN 61508:1998: Functional safety of safety-related electrical/elec-
tronic/programmable electronic control systems, Parts 1, 3, 4
 EN 61508-2:2000: Requirements for safety-related electrical/elec-
tronic/programmable electronic systems
 EN 60204-1:2007: Safety of machinery – Electrical equipment of ma-
chines – Part 1: General requirements
 EN 62061:2005: Safety of machinery – Functional safety of safety-re-
lated electrical, electronic and programmable electronic control sys-
tems
Please note this is not an exhaustive list of safety standards and direc-
tives.