Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 67)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
6-5
6.5 Digital outputs
6 Wiring
6.5 Digital outputs 6500 Digital outputs 6- 6.5.1 Supply voltage
Supply voltage 6- Verdr_DO_Versorgung
The digital outputs need a 24 VDC supply.
 When selecting the power supply, please refer to the requirements
stated under “Technical Details”.
 The power supply must be able to bridge a power outage of 20 ms.
Verdr_Versorgung_Warnung
Verdr_DO_24V_Versorg
Verdr_XGND_protego
WARNING!
Electric shock!
Safe electrical isolation must be ensured for the external power
supply that generates the supply voltage. Failure to do so could
result in electric shock. The power supplies must comply with
EN 60950-1, 05/2006, EN 61558-2-6, 11/1997.
Connector pin assignment
Connector X30 Pin Name Description
10 24 V Supply Supply voltage for digital outputs (24 V)
21, 22 0 V Supply Supply voltage for digital outputs (0 V)
Pins 21 and 22 are linked internally
Connection
Supply voltage
Max. cable length: 30 m
24 V connection isolated from exter-
nal power supply, e.g. with
isolating transformer
Noise suppression filter integrated
within the safety card
*) Please note the following
:
Link X30, Pin 21 or 22 to XGND on
the servo amplifier
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
X30
L3
10
X30
L1
L2
0 V
21, 22
+24 V
PE
+24 V
XGND Servo Amplifier
*)