Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 71)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
6-9
6.6 Encoder
6 Wiring
6.6 Encoder 6600 Encoder 6- 6.6.1 Supply voltage
Supply voltage 6- Verdr_Versorgung_Warnung
Verdr_Encoder_Versorg
Verdr_Encoder_Versorg_D72
WARNING!
Electric shock!
Safe electrical isolation must be ensured for the external power
supply that generates the supply voltage. Failure to do so could
result in electric shock. The power supplies must comply with
EN 60950-1, 05/2006, EN 61558-2-6, 11/1997.
Connector pin assignment
Connector X30 Pin Name Description
11 Encoder Supply Supply voltage for external encoder
22 0 V Encoder Supply Supply voltage for external encoder (0 V)
Connection
Supply voltage
Max. cable length: 30 m
X30/11 is linked internally to X31/4
and X30/22 to X31/9
INFORMATION
When using the safety card with the servo amplifier
PMCprotego D.72: Connect a ferrite core (Würth, No. 7427111)
before the terminals X30/11, 22 across the lines +V and 0 V.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
X30
11
X30
L1
0 V 22
+V
PE
X31
4
9 0 V
+V